Can You Use WD40 On A Blender?

Introduction.

WD 40 is a lubricating oil that has found a lot of uses in a variety of situations for its effectiveness and refined qualities. The WD in the name stands for ‘water displacing, ‘ while the 40 is the number used in apparent reference to the number of times in depth research was conducted before the lubricant was finally perfected to what we have today.

It is a multi use product and very versatile solution for needs at home, in garages and even factories. This oil is a blend of several lubricants, performance additives, surfactants and solvents, which effectively combine to deliver lubrication, water displacement, cleaning and rust protection too. It also removes glue residue used in panelling, to lubricate gate valves on a house, remove paint from tile flooring and so on.

Can You Use WD40 On A Blender? Yes, WD 40 can be used on a blender but not its rubber or plastic components, but care must be taken to ensure that the lubricant is thoroughly cleaned off after application to avoid the contamination of food items that will be blended in the unit. It is very effective when it comes to cleaning the metallic blades of the blender but not the rubber or plastic parts, which can be denatured by its chemicals.

What does WD 40 do?

As was explained earlier, WD40 has found a lot of uses in our everyday lives, such that one is likely to be marvelled at what it does sometimes. For instance, the lubricant is said to have such a very penetrative prowess that it can get into any item, porous layers of rust and use its lubricating properties to loosen the rust by just spraying it on the affected surfaces. Allow it to get a grip after spraying on any surface for about ten minutes to make it work as it should.

You can get WD-40 in offline and online stores. Here is a link to amazon to get one

What is WD 40 made of?

WD 40 is made from a complex mixture of compounds, each with its outstanding contributions to the final end product. These include hydro desulfurized heavy 1, 2, 4- trimethyl benzene, naphtha, mixed xylene isomers, and surfactants, which for the most part are not for use in food.

This solvent is known to both harm and dissolve certain plastics and even rubber, perhaps even those used in producing kitchen blenders as well. Despite this, you can still use it in removing only the blades of the blender, which are usually metallic in nature.

Is it safe to use WD 40 on a blender?

No, it is not safe to use WD 40 on any plastic or rubber components of the blender, since it is known to be harmful or destructive to its plastic or rubber parts. In addition, this lubricant is said to contain many chemical compounds that are not meant for use in food which may be harmful to human health.

For these reasons, WD 40 is not recommended to be used on a kitchen blender, except probably where you may need it to lubricate and remove the blades, if necessary. Conversely, if you happen to use it on a blender for this purpose, it is highly advised that you wash the blender blades thoroughly afterwards, just in case.

What can I use instead of WD 40 on a blender?

There are many other lubricants you can use on a kitchen blender as substitutes to WD 40, even though they may not be as efficient, but are preferred because they are less harmful or even entirely harmless to human or animal health. Some of these lubricants are: vegetable oil, olive oil, Vaseline, liquid wrench ( which is said to be even better at penetrating rust than WD 40 by some experts on the matter), and kano kroil. Others are CRC Freeze off and cooking spray oil.

What other things can I use WD 40 on?

In actual fact, the list of things to use WD 40 on is limitless, as the lubricant has put itself above all others for its constituent chemicals and their versatility. Notable among the things you can use WD 40 on are:

(1). On sewing machines wheels to make them turn efficiently.

(2). To loosen and penetrate rusted or stuck plumbing joints.

(3). In lubricating and protecting power tools at home or in industries.

(4). On carpentry saws to remove rust.

(5). To lubricate guitar strings.

(6). Used also to keep off flies from livestock.

(7). Used to fix stuck cloth zippers.

(8. To remove gum, glue, ink and any sticky residues from decals.

(9). Used in cleaning barbecue grills.

(10). To restore the gloss to car dashboards.

(11). Used on shower stains for their effective removal.

(12). WD 40 is also effectively used on chalkboards to keep them clean and easily visible.

(13). It can equally be used on electric fans in order to keep them running smoothly without any noise.

(14). It is also used to de-ice door locks in homes, offices or industries.

(15). Medicinally, you can use WD 40 on irritated muscles and nerves to soothe them and remove any complaints.

(16). Commonly, WD 40 is used on dirt and grime covered car number plates, in order to clean them up and restore their gloss and fluorescence.

(17). The lubricant is also used on boat surfaces to protect them from the obvious harm they are likely to come into from constant contact with water.

(18). Used also to discourage pigeons from congregating, and on a host of many other items, too numerous to mention for reasons of time and space. In fact, WD 40 remains, to date, the singular most universal or versatile lubricant in common use worldwide.

What you should not use WD 40 on and why.

Despite its universal and widespread applications, WD 40 is not recommended to be used on certain things to which it is destructive, such as certain rubber or plastics. This is the reason why it is not advised that you use it on them for whatever reason. Furthermore, since its chemical components are not supposed to be ingested by either humans or animals, you are highly advised to wash the blades of any rusted blender, if you have used WD 40 on it with other non-toxic soaps or detergents.

How to safely use WD 40.

Whenever metallic items containing iron are exposed to air or oxygen and water, rusting will most likely take place over time. Though this lubricant is said to loosen the bond between the rust and surface of the metal it has adhered to by penetrating it and any porous layers.

It uses its lubricating properties to loosen the rust from the metal surface. All you got to do is to spray the lubricant on the surface and leave it to stay on for about ten to twenty minutes so that it will work properly on the rusted surface.

Alternatively, you can also soak the rusted metal surface, if that is possible, in WD 40 for a couple of hours and later wipe off to remove any rust away. If it is not conducive or possible to soak bulky metal surfaces, you can just spray the lubricant on such surfaces and give it time to settle. In any case, you should make sure to avoid spraying it on any plastic or rubber surfaces.

How to make amazing natural WD 40.

This renowned lubricant has got so much acceptance that it is simply synonymous with lubrication excellence for virtually any metallic rusts and clogged surfaces. In fact, it is commonly said, and with good reasons too, that if WD 40 won’t cut it, then it cannot be done.

For this reason, where it is not readily available or the cost is beyond you or for whatever reason you cannot get it, you can improvise by making your homemade WD 40. Though it may not really be an exact replica of the industry brand, but it will serve almost as efficiently. How then does one make their WD 40 lubricant at home, and what do you need to do that? The following explanations will walk you through the process.

First, fill up an 8 ounce spray bottle with one part ordinary clean water and 3 parts of sunflower oil or even olive oil, whichever of them is readily available to you. Vigorously shake the mixture, and you have your home made lubricant.

Or alternatively, combine about 90 percent vegetable oil with 10 percent of acetone to make the lubricant after vigorously shaking the mixture to get what you want too.

It should however be known that, though vegetable oil contains GMO ingredients, which may not really conform to what you want in a perfect lubricant, there are still countless other oils that do not contain any GMO ingredients, such as soybean oil, sunflower oil, safflower oil, and so on.