Can I Use A Hand Mixer Instead Of An Immersion Blender For Soap?

This post contains affiliate links. Read the full disclosure here.

An immersion blender and a hand mixer are different in many of their designs and features, which separates the functions they are meant for. Despite these differences, their functions greatly overlap, which means that they can be used for many similar activities. In this article,  we shall see how they can be used in similar ways, despite the few differences they may have in their physical features. Many cooks prefer using immersion blenders to mix eggs and batters, or even to whip cream, functions which a hand mixer can do almost as well.

Can I use a hand mixer instead of an immersion blender for soap? Yes, you can use a hand mixer for soap. To further make a hand mixer more useful in this activity,  it has the advantage of being able to whip in more air, so as to give you a fluffier end product. In a nutshell, hand blenders are good for pureeing and blending of foods, while hand mixers are preferred for other jobs that include mixing cake batters and kneading of dough for baking, as well as in soap making. Despite these slight differences, you can use any of them for similar functions, even though one may be preferred to the other for different reasons.

Can I blend soap with an immersion blender?

 Yes, you can use an immersion blender for soap, but if you must do that, it is advisable to devote a blender for just soaping alone and not anything else, for obvious reasons. This is important because it will be difficult to get a seizing soap out of a blender.

Additionally, blend the soap in small batches and follow all the safety measures by wearing protective eye gear and long sleeve tops as well. First, put a dish towel over the lid and start the blender on low. After turning off the blender, give the soap enough time to burb. Also, make sure that the bottom of the blender and its lid are on very securely too.

Are immersion blenders great with soap blending?

 Of course, immersion blenders are simply great for soap making.  An immersion blender is a tool used to transform your oils and lye water solution into a beautiful emulsion. It is a stick with blender blades at its ends, which is great for blending soaps, sauces and other liquids too.

Though you should upgrade if you are using an older model, which will give you more smooth textures and is easy to hold and use, even if you want more attachments, such as mini chopper or whisk.

Read also- What Is The Black Stuff From My Nutribullet Blender?

How do you make soap without a stick blender?

It is easy to make soap using a regular blender. To do this, you need about 28 oz of refrigerated and filtered water, 2 quart of heat resistant glass measuring cup, 12 oz lye, 2 silicone spoons, 48 oz vegetable shortening, 21 oz soybean oil, 18 oz coconut oil, 4 quart soap making pot, silicone whisk, 2 oz franrance oil, 7 pound soap making molds, towels, knife and 2 baker’s racks. Utilize the following steps:

Step 1.

First, pour the 28 oz  refrigerated and filtered water into a 2 quart heat resistant glass measuring cup. Go to a well ventilated place and pour the 12 oz lye into the water, while stirring carefully in the process with a silicone spoon to completely dissolve the lye without splashing it out of the bowl. Now, set the lye solution down and allow it to cool off.

Step 2.

Add about 58 oz of vegetable shortening, 21 oz soybean oil, and 18 oz coconut oil to a 4 quart saucepan. Heat the mixture on a stove using only medium heat until the entire mixture melts into a liquid. Now, stir the oils well.

Test the temperature with the aid of a soap making thermometer until it reaches about 100 degrees Fahrenheit. Be sure to adjust the heat of the burner in order to maintain the temperature steadily.

Step 3.

This step involves testing the temperature of the lye solution. Once it is about 100 degrees Fahrenheit, pour the heated oils into a 6 quart soap making pot and slowly begin to stir and mix with a silicone whisk until the resulting consistency reaches that of a cake batter, at which point it is likely to achieve trace, and thus turning into soap finally.

Step 4.

Add 2 oz fragrance oil to trace, while stirring it with the whisk until it has completely combined into the soap mixture.

Step 5.

Now, pour the mixture into a soap mold and cover it, after wrapping it in towels for insulation purposes only. Allow the mold to sit for about 48 hours.

Step 6.

Finally, cut the soap into bars, before placing them on two baker’s cooling racks and allow them cure for 6 weeks. Be sure to turn the bars over every week so that they will cure evenly.

Read also- Can I put hot liquid in a food processor?

Substitutes for stick blender on soap making.

 The most common alternatives for stick blenders is to stir continuously with a stainless steel whisk or spoon. Though this takes much longer than is usually necessary and is very tiring too, but it is still almost as effective.

What other blending apparatus can I use when blending soap?

Some of the blending apparatus for use in soap making are: protective eye gear, long sleeve shirts or overalls, a dish towel, a blender or hand mixer, and so on.

Which is better for soap making, a hand mixer or an immersion blender?

 As far as soap making is concerned, a hand mixer is a lot better than an immersion blender. This is basically because a hand mixer has the advantage of whipping in a bit more air that will eventually give you a fluffier end product, but unfortunately, you can out an immersion blender, but not a hand mixer.

The Breville BHM800SIL Handy Mix Scraper Hand Mixer is known for speed and efficiency. This makes it a fine tool for soap blending task.

Furthermore, an immersion blender is best in mixing eggs and cream and also to batter or whip cream too. Finally, if you should use an immersion blender, the hot soup can make lid off the to and cause an increase of pressure in the blender as well. This means that the pressure build-up in the blender can throw off the lid of the blender, an occurrence unlikely with a hand mixer.

Read also- Can You Use WD40 On A Blender?

How do I wash a mixer after mixing soap?

 In order to wash a mixer after mixing soap, you should first and most importantly, scrape every last drop of the soap from the pot and into your molds using a rubber spatula. Since it creates less waste, it means there is also less to clean in the end. Thereafter, you can wipe the pot out with paper towels and throw them away afterwards.

This will surely clean the pot and wash out well with water in the dishwater. Alternatively, you can use a dry toothbrush or speciality kitchen brush to clean the debris around knobs on the head of the mixer. Once the dirt has been brushed off, you can use a deep cloth to wipe around the knobs. Also, you can tip the head of the mixer head backwards and clean the underside with a damp cloth.

How do you wash an immersion blender after blending soap?

 There is only a slight difference when it comes to washing an immersion blender compared to washing a hand mixer. In this case, first, clean its outer surface. After unplugging the mixer, use a damp washcloth or a sponge dipped in soapy water to wipe down the body of the blender.

Make sure that you wring out the washcloth or sponge thoroughly before wiping the blender in order to avoid getting water into the blender’s electric motor.

It is good to read your user manual so that you can be conversant with the cleaning process and the agents which you can use without taking any risks according to the manufacturers. Also, you should be careful not to immerse any electrical parts in water while washing for fear of damaging the electric motor.

In addition, you can use a dishwasher for any blender part that is safe if washed like that. The blades which are mostly metallic in nature can easily be unmounted and washed in a dishwasher, just like all other parts that are safe to be washed in a dishwater.

If you want to find out more about immersion blender washing procedure, the read- How To Get Water Out Of An Immersion Blender

Read also- Can I use a food processor instead of an electric mixer?

Can I use a hand mixer instead of an immersion blender for soap- Conclusion.

A blender has a lot in common with a hand mixer, even though their functions may overlap. You are expected to wash them immediately after use to avoid smelling and contamination of subsequent food items.

Whenever you happened to have blended something that can contaminate other foods, make sure that you wash the blender very well according to the manufacturer’s instructions. Never overload the blender such that the motors will overwork and become unduly overheated.  Don’t put too much soap in a bowl for the hand mixer/immersion blender to struggle with or lead to splattering.

Ensure also that you use these appliances rightly by consulting the user’s guide.

Leave a Reply