Why Does My Blender Smell Like Vomit ?

 A blender is a piece of kitchenware used primarily to grind grains or other dried nuts into a powder or to shred recipes into smaller bits for the preparation of soups and lots of other delicacies. Notably however, there are different kinds of blenders for different purposes, since those used for grinding may not necessarily be used for processing liquid foods and so on.

Why does my blender smell like vomit? Blenders usually smell when their bearing assemblies become seized from liquids and food seeping through. This seeping of food substances is known to task the motor to work even harder than it ordinarily should, and consequently overheat in the process or become burnt out.

“It is this burning that causes the vomit odour”.  In addition, the failure of other parts in your blender can cause the motor to fail too, resulting in a burning or electrical smell. When the blender blades do not work or rotate freely, it causes added friction and overheating the electric motor, which can manifest as an irritating smell, sometimes associated with even smoke.

What can cause a blender jar to smell badly?

Contents

 First and foremost, a blender can smell badly if its electric motor is overheated and hence gives out a choking odour similar to the smell of burning electric components. Mostly, the overheating comes from seeping food particles or other fluids when the unit is not properly tightened to seal any openings between the base of the blender and its top.

When these foods particles seep through such openings, they overwork the electric motor, which elicits the burning odour. They can also smell from stuck-on food debris or improper washing with the correct cleaning agents.

Read also- Can You Use WD40 On A Blender?

Why does my blender jar still smell after washing?

Blenders smell even after they have been washed for different reasons. First, most blender bottles are BPA( Bisphenol A) plastics, which are prone to retaining  smells and odours, particularly when they are not cleaned on a regular basis.

As a result, whenever you are washing them, it is advisable to fill up the bottle with a mixture of vinegar and baking soda and to also allow the mixture to sit overnight for more effective cleaning. Additionally, your blender may also smell after washing due to liquids and other food debris squeezing through its seals into the electric motor.

If you blend a lot of rice,  for instance, the blades are also likely to fail and cause the motors to overwork, with the same consequences too. One way to address such issues is to ensure that you tighten the base of the blender  to the top such that seeping will not take place while you blend away.

In addition, make sure to fill the blender cup only up to the indicated level on its side and not beyond that. Finally, do not let your blender to sit for a while after use before you wash it. Washing them promptly after every use goes a long way to rid them of unnecessary smells.

Read also- Can I put hot liquid in a food processor?

Foods that leave offensive smells in blender jars.

 Different foods, liquids and other ingredients have their individual smells, with some smelling more strongly than others. All the same, very thorough and regular washing does the trick of ridding this smell, especially where you use vinegar and baking soda in the washing.

Some of the commonest foods items that leave an offensive odour in blenders are:

  • garlic
  • cauliflower
  • onions
  • ginger
  • tumeric
  • and in fact, all very strong-smelling or spicy foods too.

Read also- Can You Grate Carrots In A Vitamix?

Is it okay to use a smelly blender jar?

 No, it really is not okay to use a smelly blender jar for different and good reasons including Health and physical reason. For instance, the blender smells is an indication of either overheated electric motors or stuck-on food debris in the blender, which is a medium for accommodating animal pathogens. This can lead to contaminating any food processed in the blender.

Secondly, using an already overheated blender motor can cause needless damage to the unit. In  essence, always make sure to rid the  blender of any smells or odours before you use them, for your sake as well as the safety of the blender itself.

Lastly, using a smelly blender can cause your recipes to smell too. Especially if your previous blend was garlic or any other spice with a strong smell and was not properly washed. In most cases, the smell transferred to the recipes from the blender, utters the taste and smell as well.

Read also- Can I grate mozzarella in a food processor?

Ways to keep the blender jar from smelling.

 Simple and very quick steps are available through which you can rid your blender of any needless and irritating odours.

1.  Before washing your blender, always fill the bottle up with a mixture of vinegar and baking soda, and allow the mixture to sit overnight, with the flip cap opened.

2. Second, sprinkle a piece of newspaper cutting with water or place several drops of vanilla extract on a few paper towels before you place damp coffee grounds inside the blender bottle.

3. Alternative and easier efficient way of cleaning your blender properly is by filling it up with warm water and dish soap, before you screw on the extractor blade, and run the blender for about 20 to 30 seconds. This will most likely loosen any stuck-on ingredients.

Next, using a light scrub, rinse it up, which will also clean both your blender cup and its blades thoroughly.

Read also- Why does my food processor smell?

Why do blender blades bend?

 Your blender may lose power, especially if the motor has been overheated. This can have the resultant effect of activating the thermal fuse,  which can turn off the blender in order to allow it to cool itself down.

Or you can unplug the blender from the wall socket and wait for about 15 minutes, which gives  the blender enough time for its fuse to reset itself, and hence work again.

If you fail to do any of this, it may cause your blender blades or other components to bend or deform. Rubber or other plastic components are particularly prone to this malfunction.

Read also- Can You Crush Cookies In A Blender?

What foods can you not put in a blender?

What foods you can or cannot put in a blender depends on a lot of factors. For example, some blender blades are not sharp but are rather blunt. As a result, they are not meant for cutting but grinding. This means that the blender blades are important in what you use them for.

However, there are still certain food substances and ingredients that you must not use in a blender, either because of their strong offensive odours or the likelihood of damage to other parts of the blender.

Most notable among these food items are: extra hot liquids(but if you must, get a blender for hot soup or use an immersion blender), potatoes or any thick and starchy food, which hardly ever fare well in a blender.

Other food materials you must not put in a blender are dried fruits, especially in blenders with sharp blades for cutting items and not grinding.  Also, never put any super frozen foods or ice cubes in a blender as well.

The same goes for whole spices, coffee beans, and bones too. Using any of these food substances in a blender can cause a malfunction of the unit, the presence of strong odours and a host of other complaints.

Read Also: 3 Best Blenders For Airbnb You Should Check Out In 2022

When Should I clean my blender?

 Regular cleaning of blenders is paramount, if you must keep them from smelling and maintain them in top conditions. Wash your blender before and after any use. A quick rinse before any use is very important because you need to get rid of any dust or particle that might have found their way after the last use/wash.

Well, for what it is worth, you must be careful how you wash its various parts. For example, the base of the blender that houses the electric motor must never be immersed in water.

At best, you can only use a damp and well squeezed piece of cloth dipped in soapy vinegar to wipe dirt or grime off it, but never use water to wash it. Many of the components of a blender are dishwasher safe, apart from the electric base.

This means that you can wash them in a dishwasher with clean warm water mixed with either baking soda or vinegar and dish soap. Using vinegar has the resultant effect of ridding your blender of unnecessary odours.

As for the blades, if you wish, you can unmount them and wash them manually with soap or insert them into the dishwater too. They are mostly metallic and are not likely to come into any harm this way. After washing, clean your blender of any traces of water thoroughly, which will ”prevent metallic rust”.

Most importantly, if you are not sure about anything in terms of cleaning your blender, always consult your accompanying user manual or seek for advice from experts or the customer care service center of the manufacturers. In this way, you will be kept abreast of all relevant information, such as the cleaning processes, as well as what cleaning agents to use and those to avoid also.

Read also- Why Does Ninja Blender Smell Like Burning Plastic?

Why does my blender smell like vomit ? – Conclusion.

 Blenders are used for different purposes, some for grinding hard substances while others for cutting up and shredding of ingredients. Whatever use you wish to get if for, make sure that you get the correct one with the right blades.

If you are unsure about anything, the user manual will walk you through everything about the unit. Refer all services and major maintenance to qualified personnels in order to avoid the risk of electric shock and any avoidable damage thereof. If you adhere to these instructions, chances are you will have fewer complaints and derive maximum satisfaction from your blender.

Leave a Reply