Can You Grind Chicken Bones In A Blender?

Can You Grind Chicken Bones In A Blender -The simple answer to this question is a big and emphatic “YES ” you can grind chicken bones in a blender. The reason being that chicken bones are quite soft compared to the bones of some animals.

It Is also a good practice especially in this age where we have to recycle everything to get the most out of everything – including food.

While it is possible to grind bones in a blender, be rest assured it isn’t a straightforward process.
Below is a step-by-step guide on how to grand chicken bones in a blender with little or no hassle:

How Do You Grind Chicken Bones In A Blender?


  • Materials needed
  • A blender
  • Some quantity of water
  • A bowl
  • Cloth
  • Sieve bowl
  • Dish soap

Step 1 – Plugin your blender

I don’t think I know of any blender that can be used without electricity but if yours is a battery model, good for you! But if not, then plug in your blender to a power source before proceeding to put the bones into the blender.

Step 2 – Pour in some water to aid the process.

Depends on the recipe you have, you might want to pour in at least a cup of water ( which is also dependent on the quantity being ground) into the container before grinding. However, if you only want dry bone powder, then skip this step completely and ensure your container is completely dried before proceeding.

Step 3 – Blend with the highest speed

Proceed to blend your bones with the highest speed and ensure the lid of the blender’s container is properly covered while you are at it – nobody wants bone fragments flying around aimlessly in their kitchen.

Step 4 – Pulse the blender from time to time

Ensure you pulse your blender from time to time using the pulse button (if your blender has one otherwise off and on at intervals) to ensure a proper blend and mix of the entire bones.
Note: if you intend on making pet food, you don’t have to necessarily remove all the meat from the bones.

Step 5 – Sieve the grounded bones

After you are done, you can sieve the grounded bones into particles, and depending on what you want, you can repeat the grinding process for the larger particles of bones until you get your desired result.

Step 6 – Pour out the bones into a bowl

Once you are satisfied with the result, pour out the grounded bones into a bowl and proceed with whatever recipe you have in mind.

Tips To Note :

If you intend to use the ground bones for your pet, experts have advised you to limit the ratio to at most 10%. Reason is that eating too many bones can lead to white stools, as well as constipation.

Not all pets enjoy having grounded bones in their food. if your pet refuses the treat, you are advised to explore other alternatives or uses for the bones. You could try out other meat supplements, but avoid the use of garlic and onions.

Restrict your bone grinding to soft bones such as chicken, fish, or rabbit. Beef bones are usually very hard and might end up ruing your blender if you stubbornly persist.

Depending on the pet, cooked ground bones can be harmful, leading to serious organ damage – do your research properly before proceeding to feed your pet.

Which Blender Can I Use To Grind Bones?

FAQ – Can You Grind Chicken Bones In A Blender?

Trending Searches:

Cleaning Your Blender After Use

Many tend to skip this part until when they intend to use their blender again, which isn’t a cool thing to do. cleaning your blender immediately after every use ensures the blade is properly cared for, and also reduces the risk of having stubborn stains that would be difficult to go away. Here’s a simple tip on how to clean your blender.

Step 1 – Unplug your blender from the power source

Many have had kitchen accidents because they simply forgot to unplug the blender from the plug, and in the process of cleaning, they accidentally pressed the power button – the rest, as they say, is history – don’t be that person.

Ensure you always turn off your blending machine before you begin the cleaning process.

Step 2  Pour water into the container

Half-fill the container with water, then pour in a sufficient amount of washing liquid.

Step 3 – Use a sponge to wash the container

Carefully use a sponge to clean the inner part of the container. Ensure you watch out for the blade part to avoid any sort of injury.

You can also do a quick job by plugging back the blender into the power source and blending at the highest speed.

Endeavor to pulse if you want a good job, but note that this wouldn’t be neat compared to when you use your hands to wash the container of the blender.

Proceed to wash the lid and other components of the blender, but ensure you don’t keep the motor part of the machine inside water.

Step 4 – Rinse and dry appropriately

After thoroughly washing, pour out the soapy water in the container, then proceed to rinse using clean water. Your blender should be dismantled by now. Dry the various components on your kitchen table or any suitable drying space.

What if something happens to your blender and you have bones to grind, the following alternative I will be explaining below will serve you well.

How Do You Grind Bones Without A Grinder?

  • Materials needed
  • Mortar and pestle
  • Knife
  • Safety goggles

Step 1 – Select the bone to grind

As stated earlier, you have to choose the bone you intend to grind and ensure it’s not strong. Bones of pig, cow, or lamb do not come recommended due to their tough mass. Only bones of fish, rabbits, or chickens are recommended.

Step 2 – Raw bones are the best

Whether you are blending or using a mortar and pestle, raw bones are known to be more nutritious than cooked bones. You also have to ensure the bones are fresh to get the best result.

Step 3 – Divide bones into smaller parts

Using a cutting knife, divide the bones into smaller parts to make for easing pounding. The smaller the bone parts, the easier it becomes to effectively grind using a mortar and pestle.

Step 4 – Pound the bones gently

Since you are using a mortar and pestle, there’s a high chance you might have bones flying in the air from time to time while pounding. Always ensure you wear your safety goggles at all times to prevent the bones from flying into your eyes.

You may also want to add water to ease the process, but the quantity shouldn’t be much as you might end up littering your kitchen – a few droplets would do.

Step 5 – Grind repeatedly

You definitely won’t have a smooth grind at the first go, and that’s why you would have to select the larger chunks and grind them separately and repeatedly until you get the result you desire. Once this is achieved, pour out the powdered bones into a plate and proceed with your recipe.

While you might not get the same quality compared to when you use a meat grinder or a blender, a mortar and pestle will get you something close.

Always ensure your safety goggles are on during the entire process to prevent tiny particles of bone from flying into your eyes while pounding.

You might also want to put on a long sleeve shirt to prevent the bones from sticking painfully on your arm.

What To  Do With The Extra Bones  After Grinding?

You might probably have a few extra bones after the process is complete, rather than throw them away, you can place them in an air-tight container and store them in a refrigerator for up to 10 days.

However, storing for more than the prescribed days will make the bones lose their value or quality. The fresher the bone, the more nutritious it is.

Benefits Of Using Bones For Raw Food Diet

The main goal of using raw bones to find the proper balance of phosphorus and calcium in different raw food recipes. Just like what we have in fiber, the benefits of raw bones are quite similar.

1. Cleans the anal sac of the animal

One key benefit of raw bones is it helps harden the stool of the animal which in turn helps to cleanse the anal sacs. Since we can’t reach up there to do it, we might as well allow the poop to do it on our behalf.

2. Washes the dental area

I don’t know how many people take time to clean the mouth of their pets, but chewing bones helps to create plenty of saliva, and because it’s healthy, it helps to sanitize the oral area of the pet. The chewing process also helps to make the teeth stronger in the long run.

Other FAQs

Can You Grind  Chicken Bones For Dogs?

Yes, you can grind up chicken bones for dogs, but except you have a recipe in mind, you might be better off leaving the bones in the original state rather than waste time in grinding, after all, chicken bones are soft, and the chewing process will also keep your dog busy for the time being.

What Are The Best Raw Bones For Dogs?

Based on the size of the dog in question, the following raw bones are recommended:

  • For dogs under 25 lbs. : Buffalo rib bones
  • For Small, medium, and large dogs – Beef marrow bones (raw)
  • For medium and large dogs- Beef knuckle bones (raw)

How Do You Soften Bones For Grinding?

To soften bones for grinding, simply boil the bones for some time, then proceed to dry them in an oven. Once all the moisture is out, you can grind into powder form.

Can KitchenAid Grinder Grind Bones?

Yes, the KitchenAid grinder can grind bones. KitchenAid grinders probably one of the powerful grinders available in the market, however, to make certain they carry out the job effectively, ensure you cut the chicken into bits to enable it to fit into the grinder.

Can I Make My Own Bone Meal?

Yes, you can make your own bone meal. All you need are just leftover bones, a grinder or blender, and you are good to go.

Can You Grind Chicken Bones In A Blender – Conclusion

Blenders are definitely one of the essential commodities we should have in our homes, from making smoothies to other multi-functions they are known to carry out, the list is practically endless. At least, now you know your chicken bones are no longer a waste. Have fun harnessing this great potential. Thanks for reading, Cheers!!!

Leave a Reply