Can I Use A Blender Without Rubber Ring?

A rubber ring is the same as a rubber seal or kitchen blender gasket and understanding the role played by a rubber ring will make thing’s clear to us. If you are still wondering if you can use a blender without its seal, then you need to stick around a little more.

Can I Use A Blender Without Rubber Ring? “NO” It is absolutely a bad choice to go in such a direction. Using a blender without the rubber ring or seal is like you pouring water into a basket.

The basket cannot hold even a spoon because of its porous nature. This is how it is when you are using your blender without its rubber ring.

The rubber ring is the assurance and confidence you enjoy whenever you pour ingredients into your blender(whether solid or liquid ingredients) for processing. (Here’s quality replacement gaskets with gasket pick you might want to check out on Amazon)

The rubber ring does not only secure our ingredients, but it also grants us a clean working environment and finally, it conserves our energy. Let me explain, it secures your ingredients by not allowing them to leak through the initial space between the jar and the blade.

It grants a clean working environment because it prevents spillage during blending and this is what also conserves our energy.

Imagine the stress you will go through when you have ingredients poured all over your countertop, kitchen floor, walls, clothes, etc? All that worry stops when we use a blender with its rubber ring in place.

If your rubber seal or blender gasket is bad due to one reason or the other, let’s say, it has reached its elasticity limit, got cut as a result of coming in contact with a sharp object during cleanup/maintenance and so on…

Do not take the risk of using the blender without a gasket. Often times, we are moved to manage the situation like that because most of us can’t go a day without using our kitchen blender. We fall back on it one way or the other but in an actual sense, not all condition should be managed.

Deciding to take the risk by managing some life conditions are usually catastrophic in the end. What you can do is replace it with a new one. Almost all kitchen blender spare parts are in the stores. Visits local stores and online stores to get whichever one that is damaged or worn out.

Trending Searches

How Do I Replace My Kitchen Blender Gasket?

Contents

Kitchen blenders come with some specifications that should be looked out for when replacing a lost, damaged, worn out or oversized part. Like I always advise,  before you replace any kitchen blender part, check the model of your blender first.

It will save you a lot of stress and make it easy to identify the one that best soothes your current machine. These specifications can be found under the kitchen blender motor and in the user’s guide. Take time to read through and find out which category your machine falls into.

Replacing a blender gasket can take two forms. You can either buy a new blender blade base like this Extractor Blades Replacement Part Bottom Blade for Ninja Blender that comes with a gasket. This is the easiest way to replace your blender gasket. It requires no removing and installing of any part.

Just order from the stores using your current blender specification to avoid wrong purchase. It will work just fine as though you just got a new blender. Wait a minute you actually just did!

Once you get your new blade base, just do away with the former by placing the new one where the former used to be. If the blender is designed to house the blade in the jar, just unscrew, remove and replace. That should be easy to do.

But if you just want to get only the rubber gaskets/rubber seal/rubber ring, that is also cool. But do o not forget to look out for specification because it comes in sizes too.

This is because people often assume that since the seal is stretchy, it can fit into any space but that’s a wrong assumption. Just as blender motors, jars, blades, lids, are bigger than some, the same implies for rubber seals. I’ll walk you through how to successfully replace your kitchen blender rubber ring/seal/gasket right away!

Can I Use A Blender Without Rubber Ring-FAQ

Best Way To Replace Kitchen Blender Gasket At Home

Let’s say you’ve got a new rubber gasket and are ready for replacement just follow the steps below:

  1. put on your protective gloves
  2. place your blade on the countertop
  3. bring out your new rubber gasket
  4.  carefully place the new rubber gasket under the blade.
  5. Passing through one blade at a time to avoid contact with the blades
  6.  engage all your fingers in the task. The stretchy nature of the gasket will pose a little obstacle, so use one finger to press down the side you have pushed into its rim
  7.  once you have succeeded in pressing some portion of the gasket into the rim, follow the line with another finger and trace the gasket in a circle along the rim.
  8.  keep the first part pressed down and continue tracing till the remaining portion of the rubber gasket sits.

Tip:  Do not remove your finger from the beginning point until all the parts of the gasket have been pushed into the rim. Any error will cause the blender gasket to bounce out and you will start all over again.

A lot has been said on the importance of the gasket but is there any other thing we can use in place of the original material?  Is the gasket the only option I  have? What do I do in case of an emergency? These repeated worries and quest has led to people seeking for a way out.

Read also-

What Can I Use Instead Of A Gasket?

Well, as we already know, improvisation is the order of the day. A lot of issues have birthed it. With a little awareness, life’s threatening challenges often become easy.

Gone the day’s people worry themselves for what is unnecessary. If you must go out and your belt is missing and you desperately need to tighten your trouser against your waistline, go for a shoelace.

Using a shoelace on jean is not such a bad combo. Honey in place of sugar isn’t as well and the same implies for using bathtubs as jacuzzis for relaxation. These illustrations point out only one objective and that is if you must improvise, make sure it doesn’t have a negative after effect.

What Can I Use Instead of A gasket?

Improvisation which gives room for creativity is usually not limited because it opens doors to possibilities. Gaskets are usually made from flat materials this enables them to lap properly and act as the seal that it is.

These materials includes paper, neoprene, fibreglass, rubber and even metal. The material used is determined by the nature of the equipment. Kitchen blender gaskets are usually made from soft stretchy rubber materials that sit effortlessly on its rim.

By this we have been enlightened about the material that kitchen blender gaskets are made from, so we now have in mind that whatever we want to use must be soft and stretchy too.

You can improvise a kitchen blender gasket with sealant products that are compatible with food. They are also referred to as RTV(Room Temperature Vulcanizing Sealant).

As we discussed earlier improvisation should not in any way have a negative effect on us in terms of our health or damage the material.  Sealants such as Silicon RTV 4500 Food Contact Safe and  Food Grade NSF FDA RTV Silicone sealant are suitable for this purpose.

The listed products are in accordance with food safety and are compatible with food. If you do not like any of the listed products due to price factor, or personal reasons, surf the online stores for more options and enjoy other related products.

Worthy of recognition is the fact that the enlisted products are NSF & FDA approved. Very good to use, safe also, bonds easily to all gasket rims and finally, its face is waterproof.  Making it the exact material that we need for the sealing job.

Can You Use Silicon Instead Of A Gasket?

Since Blender gaskets are made of highs quality rubber materials, are soft and have good elasticity, and are non-toxic, tasteless, healthy and environmentally friendly, it, therefore, means that whatever we want to use must fit into this category.

RTV Sealants are silicon materials that are melted and package in tubes for easy application and for the sake of branding. They come in various names depending on the company where it is manufactured.

Yes, you can use silicon as a replacement for your kitchen blender seal. Some people use it together with the rubber ring/gasket in order to make it sit appropriately. The only “but” is to read carefully and pick the ones that won’t have an effect on our health.

With silicon, you won’t need to check for gasket size because it is used as a filler. What u need is what you press into the sealing space. The shape of this product is not defined as found in our regular gasket which is either circle, semicircle, rectangular, square and sometimes comes in irregular shapes.

So we are at liberty to use it to form any shape that we so desire; whether regular or irregular.

The RTV silicone sealants are applied and allowed to cure for some time. Removing cured RTV sealant from a surface requires procedures that the normal gasket does not go through.

To remove a dry/cured silicon, you can try scraping it off with silicon scrapers but this sometimes leaves a messy and rough surface after work. To avoid damaging the surface of your property, apply the RTV sealant remover

Can I Make My Own Gasket?

It is important to note that kitchen blender’s gaskets are usually made from soft high-quality rubber materials with good elasticity, having no taste or whatsoever.

The material is also healthy and should be environmentally friendly. This specification is for our own benefit. If the material has no side effect then we are safe. Deciding to make your blender gasket isn’t a bad idea but look out for the chemical and physical properties.

Yes, there is room for improvisation but when making your blender gasket, do not use just any material you see or assume suitable. Check for the chemical properties of that material.

Making your own blender gasket is not totally a bad idea itself but getting the right material is the challenge. By the right material, I’m referring to the health implication of the material you intend to use as well as the physical components. This is because it comes in contact with food and any error can tamper with our health.

Blender gasket spare parts replacements are not so expensive or scarce so why the stress but if you are in a situation that requires immediate improvisation, I’ll suggest you use sealants.

Remember that we do not want to poison ourselves all because we want an escape route. Don’t just cut any material into shape. Silicon that are food safe are a better option. In the absence of food-safe sealant, use other equipment to do the blending job instead.

Can I Use A Blender Without Rubber Ring-Conclusion

Bear in mind that motorized blenders are not the only way to blend food and this article is not advocating for it. There are other ways you can manage if you have found yourself in a tight corner in the case of an emergency.

So, I’ll advise that we look around our home/ environment and see what other healthy stuff we can use to blend our food awaiting the proper replacement for our dear kitchen blender gasket.

You can use the following: potato masher, hand blender, fine mesh, mortar and pestle, grinding stone, grater, and immersion blender. Good luck!

Leave a Reply