The first question that usually pops up when such a situation arises is whether or not it is safe to clean the nutribullet base. So is it safe to clean nutribullet base? Yes, it is safe to clean it.
However, there are ways to carry out the cleaning process in order to get it right. This is where the steps involved in cleaning it comes in.
Cleaning process is not necessarily tedious if you do an immediate whipping of any spillage; be it spilt milk during shakes or veggie smoothies. Prolonged usage without whipping will warrant a thorough but mild-scrubbing procedure.
Let’s look at some of the things we need to clean nutribullet immediately after leak as well as getting stuck stain off our dear blender base.
Things You Need To Clean A Nutribullet Base After Leak
Contents
- Hand gloves
- A working surface
- A towel
- A toothbrush
- Little mixture of warm soapy water in a bowl
- A hand dryer(cool)
- A flashlight (if necessary)
It is best to clean the nutribullet as soon as you see any sign of leakage. I strongly advise that you suspend the pureeing activity. Unplug from the socket once there is a spill sign and whip with a semi wet towel.
After this, you can go on and blend. The reason for unplugging first before cleaning is simple. It is a way of observing personal safety. You wouldn’t want to be electrocuted in the cleaning process, would you?
Haven looked at what we need, let’s quickly check out the procedure involved. Please note that the jar is the only thing to be removed in order to access the inner chamber of the base.
Do not loosen any mechanical part of the power base in the nutribullet during the cleaning process. No unscrewing of any sort. Just bend the base over to get a clear view of what you are cleaning.
Also, do not immerse in water, any part of the nutribullet base because it will damage it. Since it is not washing machine safe, such practice is a red flag.
Pro Steps To Cleaning Nutribullet Base After Leaking
These steps are required if you have been using your nutribullet over time and there seem to be dried spilt food particles in the base.
Otherwise, Such steps won’t be needed if you whip immediately with a semi wet towel once you notice the spillage.
Step 1. Disconnect the power base from electricity by unplugging it from the socket
As established earlier it is dangerous to carry any cleaning process when the appliance is connected to electricity. Always observe safety.
Step 2. Put on hand gloves
Hand gloves are an important tool for nearly any task. As it gives a grease-free grip.
Step 3
Pull out the nutribullet jar from the base to have access to the area you intend to clean
Step 4
Bend the power base over. Preferably sideways to reveal the inner stains you want to whip off and to also aid easy scrubbing
Step 5
Use the toothbrush to touch the soapy mixture to have a good soak
Step 6
Begin the scrubbing process gently. Go easy but be fast too. As we do not want water entering the mechanical parts
Step 7
Make sure your towel is on standby. So that you can use it to whip off areas that has scrubbed with a brush. As you whip observe process so far.
We have discussed how to clean the stains caused by leakage but what really makes the nutribullet leak?
Trending searches
- Can A Magic Bullet Blend Ice?
- Where Does The Rubber Seal Go On A Ninja?
- How Early Is Too Early To Use A Blender?
- Do Ice Cubes Sharpen Blender Blades?
- Can You Whip Egg White In A Blender?
- Can I Use A Blender Without Rubber Ring?
- Can I Blend Hot Soup In My Ninja
- Can You Grind Coffee Beans In A Magic Bullet?
- How Do You Puree Food Without A Blender?
- Can I Crack Corn In A Blender?
Why Is My Nutribullet Leaking?
Nobody wants a leaking blender. Having one that leaks is bad news. This is not to say that the nutribullet does not have advantages.
But just like every other product out there, there must be a challenge one way or the other. These minute problems cannot hinder us from using them.
The nutribullet was actually designed to relieve stress, not aid one. This is what worries our minds when we examine the stress we go through due to its leakage. Seeing it create some little stress through leaking is a huge turn-off. Because it comes pricy.
Notwithstanding, it has also done well in areas of helping us get vital nutrients from our food blends and fitness freaks can attest to that fact.
Reasons Why Nutribullet Leak
- Crack on the jar
- Worn out rubber ring
- Loosed cap
- Overloading
- Vibration
- Factory fault
How true can these listed factors be? Are they really capable of making the nutribullet leak? Well, yes they are and are even capable of making not only the nutribullet but just any other blender out there to leak. Fasten your seat belt as we examine the dangers that these factors pose against any blending appliance.
Cracked Jar
The jar houses the recipes. It is in the jar that the ingredients are processed and secured. When the recipe house(jar) is cracked, it might not be noticeable at the early stage since the recipes are still in solid form.
But when they have been broken down, to liquid or semi liquid form, the blended recipes will begin to escape gradually from the open space in the jar.
A leaking jar is a big turn off. So whenever we notice a leak in our blending appliance, the jar should be considered and examined if there is any case of cracks.
Worn Out Rubber Ring
It has become a known fact that the rubber ring plays a vital role in keeping recipes secure in the jar during blend. It does this by acting as a SEAL between the jar and the blades. There is hardly any blender device without one.
The rubber seal has to be in good shape always as we cannot afford the mess we will make if ours is worn out or totally damaged.
If the rubber ring is worn out, there will be no grip and this can cause the recipes to leak through the space between it and the jar.
Loosed Cap/Lid
One factor that makes the nutribullet and magic bullet unique is the reversed cap position. This is not the same in most blender appliances. If the nutribullet is not tightly locked, it will leak during blend.
Overloading
The nutribullet jar has a maximum loading specification. Yet some persons don’t observe it. Since the cap and blades are facing downwards, it will be appropriate to put a little recipe into the jar at a time.
This will avoid putting too much pressure on the cap. Too much pressure on the cap will make it difficult for the blades to work well.
As the blades struggle to rotate without success, the cap will be left with no option other than to give way and leakage is usually the result of such an event.
Vibration
Blenders vibrate when the motor is on and the blades are rotating. Vibration appears to be one of the factors that causes the nutribullet leakage because, what serves as the cap/lid also serves as the blade-house (dual purpose). Any vibration during blend is enough to loosen a tightly place.
Factory fault
This came last because there is a tiny window for such to happen but it still happens anyway. When we are faced with challenges in a product, let’s not be too quick to write the product off. The problem could be due to a slight error from the factory since mistakes are bound to happen.
Read also- Can I use a hand blender in a plastic bowl?
How To Fix A Leaking Nutribullet Base
Fixing a problem is easy once you identify the cause. The solution comes almost natural.
So far, we have identified what causes the nutribullet to leak to be cracked jar, worn-out rubber ring, loosed cap, overloading, vibration and factory fault.
Use these listed factors to troubleshoot your nutribullet. If the leakage is caused by any of the listed factors, follow the solution suggested for maximum performance.
To Fix A Leaking Nutribullet Do The Following:
1. Replace Cracked Jar
Replacement parts are both in online and offline shops. Place order using the model specification to get the exact size.
For instance, here is one that is compatible with Nutri Bullet 600W/900W Blenders. This replacement jar comes with measurement specification(which is a plus)
Many have testified that a totally new jar saved the day. This is because nutribullet manufacturers have listened to various complaints have upgraded their cups.
2. Change The Rubber Seal
In most cases, the colour is the same as the cap. So it might pose a little challenge to identify but it’s there. Some claim theirs did not come with a rubber seal. Just try poking at the corner of your nutribullet cap with a sharp object and you will see it.
Tighten Blade Screw
Since we already know that if the blade and cap is not tightly screwed together, the nutribullet will leak, it will be right to tighten it.
Get a screwdriver and tighten the blades. Once this is done, try blending again to see if the leaking has been handled.
Place Lid Tightly
Loosed lids usually lead to leakage and possibly total outpour of everything that is put into your blending device.
To solve this, always confirm if the lid of your nutribullet is tightly placed. In any case, you notice that the lid doesn’t fit anymore, get a replacement.
Extra Tips
Place your hand on the nutribullet jar while blending to stop the cap from shifting which could cause the lid to loosen. It will also prevent any form of problems that accompany vibration as well.
Also, try this trick whenever you want to blend. Apply a little amount of vegetable oil on the lid. Mind you, avoid touching the threads. Just oil the lid and place it back on your nutribullet. It strengthens the grip and stops leakages.
If you have applied all these solutions to curbing a leaking nutribullet and yours still leaks, then it could be a factory fault.
Read also- Are blender bottoms waterproof?
How To Clean Nutribullet After Leak-FAQ
Can Leakage Damage Nutribullet Power Base?
So far, there’s not been cases of power base damages due to leakage. This because the top of the base is sealed with plastic material. This plastic material acts as waterproof. I’m guessing they saw the leakage coming.
But depending on the volume of leakage, little liquid can escape through the small opening under the roller. Which in turn can be harmful to the appliance. That is why I recommend a towel on standby to whip off any form of leakage during blend.
On the other hand, apply the suggestions above to stop it from leaking.
What Are The Challenges Of Using A Leaking Nutribullet?
Using a leaking nutribullet comes with a handful of challenges. While some are psychological, others are physical.
To the user, there is first of all a feeling of disappointment, because the nutribullet is pricy. This feeling affects the user psychologically as some might have a bit of regret purchasing a leaking blending device.
The next challenge for the user is the stress to clean up during and even after blend. This is considered as the physical challenge. If your nutribullet leaks during blend, you will notice how discomforting it can be.
Yes, you will surely wash your nutribullet after blend but seeing your recipes leak through and having to whip during blend was never part of the bargain when you purchased it.
How To Clean Nutribullet Base After Leak- Conclusion
leakages are messy and no one wants that anywhere and certainly no during blend. In the case of a leaking nutribullet, we do not only stand the stress of cleaning it after use but we lose some recipes in the process.
This is not to say that it is totally bad. Let me remind us that the nutribullet is not the only blender that is capable of leaking.
Intact the advantages of the nutribullet outweigh the disadvantages. Therefore, it’s not a bad machine simply because it spills during blend.
In this survey, we see that the idea of reversing the lid position and housing the blade on the lid is not totally a good idea either.
Haven seen that most of the leakage issues emanates from the upside-down position of the jar, the manufacturers should look into it seriously.
