Can You Use An Immersion Blender In A Mason Jar?

Mason jars are made from tempered glass, and as such can withstand even very high temperatures. All the same, you are not advised to use them on non-stick pans and glass dishes, since glass can easily chip or even shatter when it is impacted upon by the blades of the blender.

An immersion blender, on the other hand,  can make varieties of recipes like mayonnaise, and it can equally be used as your mixing container or for storage purposes too.

So, Can You Use An Immersion Blender On A Mason Jar? Yes, you can use an immersion blender in a Mason jar, but you have to find one that is small enough to fit into the opening or mouth of the jar.

Immersion blenders are preferred by many people to conventional blenders because they use up much less storage space. In order to blend smoothie recipes, use a Mason jar as a blender, which can also serve as a drinking vessel and for storage as well.

Read Also: Is It Safe To Use A Mason Jar On A Blender?

How do you use an immersion blender in a Mason jar?

Contents

 The following steps will guide you adequately on how to use an immersion blender in a Mason jar.

Step 1.

First, make sure that your bowl is deep enough such that the liquid contents will fill it only about halfway up its sides.

Step 2.

Then, submerge the head of the blender in the soup before you turn on the motor and start from slower speeds at the beginning. As you continue to blend, ensure that you tilt the head of the blender until you see a slow-moving vortex of fluid or whirlpool formed in the center of the bowl.

Step 3.

Now, hold the blender steady until the soup in it is perfectly blended as needed.

Alternative Ways

An alternative method is equally as effective too. Though this method may involve more steps and could take longer to accomplish, it is still worth it, considering the excellent result you will get in the end.

Step 1

Start by unscrewing the base of the blender.

Step 2

Next, pour your recipe into the clean Mason jar.

Step 3

Now, with the aid of the separated base,  cover the Mason jar. It can serve you as both the cover and the base to the jar.

Step 4

Next, screw the immersion blender tightly to the mouth or opening of the Mason jar in order to avoid any leakage or possibly poor performance.

Step 5

Thereafter, fix the Mason jar to your blender motor.

Step 6

Then, connect your blender motor to the power source and happily blend away.

Step 7

During blending, it is good to start from low speeds.

Step 8

As you blend, observe the little breaks while blending in order to avoid any heat build up from severe  blade friction.

Step 9

At frequent and regular intervals, use the pulse button to shake up the recipes in the Mason jar for better results.

Read Also: Can You Take A Nutribullet On A Plane?

Why should you blend in a Mason jar? 

There are many good reasons why many people prefer to blend in a Mason jar. First, a Mason jar can serve both as a drinking  vessel and a means of storing blended substances too.

In addition, most other types of jars or bottles are liable to break or crack under intense pressure during blending and also from high temperatures.

This is because Mason jars, unlike other jars or bottles, are made using pressure and heat resistant glass. There are also Mason  jars that can be used conveniently to can foods in the refrigerator or even to store cooked food on the counter.

Most people however, prefer using Mason jars in blending their recipes because these jars have enough volumes that can take a reasonable amount of ingredients. This means that they can blend without much chance of their contents spilling over the top.

Read also- Can I use a hand blender in a plastic bowl?

Will an immersion blender crack a Mason jar during blending?

 An immersion blender is highly unlikely to crack a Mason jar during blending, an occurrence which is common with other jars or bottles.

Mason jars can withstand significant stress resulting from either blending temperatures or pressures, because of the quality of the glass material used in producing them.

In conclusion therefore, a Mason jar is not likely to crack or shatter during blending ingredients due to any of temperature raise or increased pressure from stressful handling.

Read Also:  Can You Put Soda In A Blender?

 Do immersion blenders blend well in Mason jars?

Yes! In fact, immersion blenders perform considerably better when used in blending in  Mason jars. Though, if you want this to be most satisfactory, you should get a Mason jar with a wide mouth or opening through which the immersion blender can be put in place.

Also, when you blend with an immersion blender in a Mason jar, you are also saving up a lot of storage space in your kitchen because they use just a little space.

Blending in a Mason jar also gives   you the opportunity to prevent undue spillage on to your work table as well. Finally, using a Mason jar for blending is a lot more effective and less stressful than through the use of most other types of blenders on the market.

What are the things an immersion blender can blend?

 An immersion blender can process virtually any common recipe in the kitchen ranging from fruits, vegetables, nuts and grains. Some examples of these are tomatoes, pepper, spinach, strawberries, apples, banana, spruce, cabbage and a whole lot of other things as well.

They are able to reduce grains into fine powdery forms and are also capable of extracting the nutrients in fruits for the production of spicy drinks. Mason jars are not hard to get because it comes as caning for some foods.  So,  tell a friend not to throw theirs away or order for new clean ones here 

Do immersion blenders blend smoothly?

 Yes, immersion blenders blend smoothly like most other blenders or even better. If you wish to get the required smoothness, do not start the blender at high speeds.

Start from operating the unit at a lower speed and work the speed up gradually, while tilting the blender occasionally to get a perfect mixture and blend.

Read also – Can I sharpen immersion blender blades? 

What size Mason jar will fit an immersion blender?

The size of a Mason jar that will fit an immersion blender depends on the size of the blender. It is for this reason that immersion blenders and Mason jars are built to specifications. Therefore, you are advised to get both a Mason jar and an immersion blender that will fit perfectly.

The user manual enclosed in the unit will tell you exactly what size Mason jars will fit what size of immersion blenders. If you are still confused about this compatibility issue, you may contact the customer care service of the manufacturers for more information.

However, a reliable index by which you can make an effective or satisfactory choice is to ensure that the blades of the blender do not touch the inner surface of the wall of the Mason jar while rotating.

If they do, it is not a good fit, and again, this presents the likelihood of the jar breaking or cracking during blending due to the persistent knocks of the blender blades on the Mason jar containing it.

What are Mason jars used for?

 First and most importantly, Mason jars are used to blend recipes of all kinds, and some are even used to can and preserve food items. They can also be used as seedbeds in gardening.

In terms of storage of artifacts and ornaments, these jars can be utilized in storing pencils, pens, crayons as well as jewelries. Additionally, spices, salt and seasoning  cubes can also be stored in them conveniently.

Mason jars are also known to blend ice into smaller fragments too, but when blending ice, use a small quantity at a time. Grains and coffee beans are also ground in Mason jars, but make sure that you do not overload the blender when doing this, or you may risk damaging the unit in the process.

Why do Mason jars crack?

 Though Mason jars rarely crack because of the nature of the glass used in producing them, but they can be broken under certain extreme conditions, such as falling off while handling.

One of the most common reasons why Mason jars break is extreme vibration, and for this reason, you are advised to always blend on low speeds, in order to reduce the associated vibrations to bearable levels.

Your Mason jars can also break if you use an immersion blender with blades that are too big for the Mason jar. To this end, choose your blenders carefully and according to the advice given earlier in the article.

If you use your Mason jar wrongly, it can crack as a result too. This includes blending hot items. To guard against any willful damage thereof, get a suitable Mason jar that can handle hot ingredients. Finally, there are counterfeit Mason jars on the market that are liable to crack easily. So, make sure that you get only a good one.

Can You Use An Immersion Blender On A Mason Jar – Conclusion

 Mason jars and immersion blenders make a good combination when it comes to grinding recipes for meals or drinks at home.

However, for you to enjoy their excellent performance at all times, you should know the type you want from the uses you intend to put them, how to maintain them, and so on. If you take care of all these, chances are pretty high that you are not likely to suffer any disappointments.

Leave a Reply