Are blender bottoms waterproof?

While the blender is a simply designed kitchen appliance, it has some parts that help it function. These parts make it possible to grind or blend different ingredients and make recipes. Using your blender to make recipes can make it get messy which makes maintenance vital.

Cleaning the blender after use is very important for it to last long, but can all the parts be immersed in water? Let’s find out if blenders are water-resistant. “Are blender bottoms waterproof?”

Are blender bottoms waterproof? Blender bottoms are not entirely waterproof. How? The blender bottom can only withstand a short timing immersion in water. If the blender bottom is immersed for a long period, lubrication from the bottom would start dripping with time.

Immersing the blender bottom in water for a long period can cause unnecessary wear to the posture in the blending panel.

However, this wearing and lubrication are not harmful, you can affect your blender base if you put a wet bottom on it. It can also cause the blender to spark when it is connected to electricity.

If you want to clean your blender, it is best to put soap and water in the container and allow it to run for 25 seconds.

Avoid unscrewing the blender bottom and immersing it in water, in addition, do not place the blender on the electrical base when it is wet.

Are blenders waterproof?

Contents

Your blender resistance to water depends on the type of blender you have and the parts. While the blender has different parts to make it operate as expected, you have to maintain them properly.

However, not all the parts of the blender can be immersed in water. You might just need to use a damp cloth to clean some parts and one of them is the blender base. The blender electrical base is not waterproof due to the powerful motor built in it.

You can easily use a damp cloth to clean the outer part of the electrical base. Aside from the base, the blender bottom should not be immersed in water for a long period. Immersing it in water can cause dripping lubrication of the rubber material.

Blender jars can withstand water for a long period, but the blade could be a hindrance. How? A blender blade shouldn’t be kept in water often because it could make it blunt. However, if you can unscrew the bottom blades before washing the blender, then it shouldn’t be a problem.

Due to the necessity of maintenance in your blender, you can put a warm water and a drop of soap in the container, connect it to the base, and let it run for a few seconds. This would prevent you from putting the whole blender in water.

Read also- Can you run a blender off a car battery?

Can I put water in a blender?

Of course, you can put water in a blender for grinding, blending, mixing, and so on. Water can also be good for cleaning the blender’s container. Water is needed in most items or ingredients you have to blend.

So, if you want to add water to the ingredient you are grinding, carefully open the blender lid, and add the water slowly to make sure the content does not overspill.

However, adding too much water is not favorable, plus you need to be conscious of the water temperature you are using.

Using water that is too hot can cause a messy explosion from the content in the blender. This explosion is due to the intense heat or pressure accumulated by the initial and final temperatures in the blender.

This also applies to the self-clean procedure; you should add warm water with soap and not hot water. In making a smoothie, you might have to add sparkling water.

You might be thinking if sparkling water would cause heat accumulation in the blender. Well, due to the carbon in sparkling water, you can easily conclude that it would cause pressure accumulation.

However, pressure accumulation would not cause an explosion due to the blades. The blender blades can decrease the quantity of carbon in a drink to make it light and enliven to drink.

Read also- Can Ninja cups go in a freezer?

How do I clean my blender?

You can clean your blender in about 25-30 seconds by following a few steps. A lot of people do not make use of the blender often due to the cleaning process.

In all blenders, a handbook for blender users is always added to the package. The manufacturer states the instructions to follow to clean your blender.

However, there is an easy step to follow to clean your blender. These steps are easier and faster than the old method.

I would provide you with the steps below, so carefully heed to them one after the other to get your desired result. Before starting, you need a few materials.

Materials

  • Warm water (not hot).
  • Liquid dish soap.

Tip – you do not need to detach your blender.

Step 1 – Add the water to your blender

 Fill up the blender pitcher halfway with warm water.  Ensure the water is not hot.

Step 2 – Put the soap

When the water is halfway through the pitcher, add the liquid dish soap you purchased. Just put two drops.

 Step 3 – Switch on your blender

 If you didn’t detach the pitcher from the electrical base as instructed, you can switch on the blender. If you detached them, put the pitcher back on the base and turn on the blender.

Hold the cover lid with a dry towel and allow the blender to run for 25 seconds.

Step 4 – Pour out the soap water and rinse

After running for 25 seconds or 30 seconds, pour out the soapy water, and rinse with clean water. After rinsing, you should have a clean blender.

Tip – do not let the blender run for more than 30 seconds.

Read Also- 5 Best Immersion Blenders For Cosmetics

 How do I clean the base of my blender?

You can clean the electrical base of your blender by handwashing. If the blender is very dirty, add a drop of soap to a small bowl of water. Dip a towel or sponge in it and use it to clean the electrical base.

If you just need to clean the base, you can just use water and a sponge. When you are done, allow the base to dry and store. I

t can be quite tempting to put your blender aside without washing it, but you have to grow the habit of always washing after every use.

If you don’t wash your blender immediately, it can get very difficult to clean afterward as the ingredients in it would have dried up. Sometimes, due to spills, the electrical base could get stained.

So, hand washing them after use would save you from stressing your hands to remove hard stains. This also applies to the blades and the blender pitcher, after using them, you can do a quick self-clean with soap and water and rinse.

However, do not put the electric base in water in full so as not to destroy the motor. If the base is immersed in water when blending, it could cause electrical sparks and end up spoiling the power motor.

Maintaining your blend would help it last forever, but taking precautions would also help. Cleaning your blender would also stop it from making so much noise while blending.

Read also- How To Clean Nutribullet Base After Leak With Steps

Will my blender break if the bottom gets wet?

No, a wet bottom would not cause your blender to break. Although it could cause the electrical bottom spark while connected to electricity. If your blender bottom is wet, unplug it from the socket, and ensure it dries for at least 24 hours before you use it.

The major piece that shouldn’t get involved with water is the motor. It makes the blender function and it was inbuilt in the base. However, if it is immersed in water, it can be risky.

If your blender is closer to the sink, ensure you unplug it. If your blender bottom gets wet by mistake and the water manages to get into the base, let the blender dry completely before attaching it back as stated earlier.

Cleaning your blender is important, drying it is also important. If you are adding water to the blender while blending, ensure you carefully do it.

A blender is an electric machine that needs electrical power to function and you know water and electricity are not compatible. So, if at all your blender bottom gets wet, ensure it is not connected to the socket.

You should also detach the removable parts for them to dry and when you are storing your blender, store it in a cool and dry place as instructed by the manufacturer.

Conclusion- Are blender bottoms waterproof?

Being safe with the appliance you use regardless of the size is important. Try to avoid using extremely hot water in your blender, instead use warm water and always ensure your blender is well dry before using it.

Be careful with how you put your blender in contact with water or any liquid, and exercise the best maintenance culture possible.

Leave a Reply